DNS_probe_finished_nxdomain error: what it means and how to fix it
👀
When browsing with Google Chrome, there may be times when the error occurs Unable to access the site with a reference to the code dns_probe_finished_nxdomain: what does this mean and what is the cause of the problem?
The mistake dns_probe_finished_nxdomain this is an indication that the browser could not resolve the domain name requested by the user. Chrome couldn't find any hints to resolve the domain locally, nor did it get a valid response from the DNS server configured on your device or router.
If you try to type a domain name that doesn't exist in the Chrome address bar, you will actually receive the dns_probe_finished_nxdomain error. Precisely because the domain indicated is not present at the level of the DNS server (the necessary association between the mnemonic address and the IP is missing: see Google DNS, here is how they work and why they are useful).
The first part of the error could be translated as follows: " DNS side check complete". The second (" nxdomain") Can be rendered as"non-existent domain " or " the domain name does not exist"
The error is very common with Chrome and other browsers, so much so that Chromium and most derivative products (such as Microsoft Edge) always return the dns_probe_finished_nxdomain message.
How to fix dns_probe_finished_nxdomain
The appearance of the error usually has nothing to do with the lack of network connection because in this case Chrome and other browsers would return the message err_name_not_resolved.
To overcome the appearance of the dns_probe_finished_nxdomain error, it is therefore possible to follow a few simple steps:
1) Make sure you entered the domain name of the site of interest correctly in Chrome's address bar, especially if other websites are accessible correctly.
2) If using a VPN service, check that it is working properly by temporarily disabling it, thus verifying the possibility of accessing different websites. Major VPN clients usually force the use of their own DNS servers instead of user-defined ones on the single device or router, also to avoid the problem known as DNS leak: DNS leak: what it is and what it means for users.
3) Press Windows + R then type cmd and finally press the key combination CTRL + SHIFT + ENTER to open the command prompt with administrator rights.
Issue the command ipconfig / flushdns to completely empty the Windows DNS cache. Then try to visit the previously requested web page again.
4) Still at the command prompt, try typing the following to request a new private IP address from the router:
ipconfig/release
ipconfig / renew
5) Try to clear the DNS cache managed directly by Chrome. To do this, simply type chrome://net-internals/#dns in the address bar and click the button Clear host cache.
This special address can also be used with Chromium and all derivative browsers, including Edge.
6) Still from the command prompt window opened with administrative rights, by typing % systemroot% system32 drivers etc hosts notepad we suggest that you check that the Windows HOSTS file does not contain mismatch between mnemonic addresses and IP addresses: edit the HOSTS file and block the applications that call your home.
7) Try to change the DNS servers used for domain name resolution. For example, set those from Google (8.8.8.8 is 8.8.4.4) as primary and secondary in the network interface settings of your machine.
Instructions for doing this are described in the article Change DNS on Windows, Linux, macOS and Android.
You can also configure other DNS servers on the local device: Better DNS: which to use for browsing.
If the intervention is decisive, the DNS servers can also be configured on the router in order to automatically configure their use by all other client equipment connected to the local network via an Ethernet cable or via a WiFi connection.
The IP addresses of the DNS servers to be used on the router can be set by accessing the administration interface of the device (usually it is sufficient to type 192.168.0.1 ou 192.168.1.1 in the browser's address bar) and then find the section LAN ou Local network. You will find the setting to specify the IP addresses of your chosen DNS servers.
If you cannot find the router's IP address to access its administration interface, just type ipconfig | findstr "Gateway". This should read the private address associated with the router. However, you will need to enter the correct username and password to access.
Discover more articles in our categories windows, Internet and even Computer and internet.
In the end Thank you for your visit we hope that our article DNS_probe_finished_nxdomain error: what it means and how to fix it
help you, don't forget to share the article on facebook, instagram and email with the hashtags ☑️ #Erreur #DNSprobefinishednxdomain #this #signifies #comment # remedy rem!