Open the web browser and type the IP address http://tplinkwifi.net or http://192.168.0.1 into the address bar and then Press Enter. Type the username and password into the boxes of the login page, and the default username and password both are admin, then press Enter.
Par ailleurs, How do I access my tp link router settings?
Open your web browser and type the LAN IP address of the router in the address bar (the default IP address of TP-Link Modem router is http: //192.168. 1.1.), then press Enter. When you are prompted, enter the router´s username and password (the default username and password are both admin).
Ainsi, How do I get my tp link to work?
– Turn off your DSL modem, router and computer.
– Connect the WAN port of the router to the LAN port of your DSL modem with Ethernet cable.
– Connect the phone line (DSL Line) to the Line port of your DSL modem.
– Connect your computer to one LAN port of your TP-Link router.
Cela dit How do I access my tp-link router settings?
Open your web browser and type the LAN IP address of the router in the address bar (the default IP address of TP-Link Modem router is http: //192.168. 1.1.), then press Enter. When you are prompted, enter the router´s username and password (the default username and password are both admin).
How do I access my router TP-Link?
Login to Modem Router’s configuration page. Open your web browser and type the LAN IP address of the router in the address bar (the default IP address of TP-Link Modem router is http: //192.168. 1.1.), then press Enter.
How do I log into my TP-Link Router?
Step 1 Open the web browser and type the IP address of the device in the address bar (default is 192.168. 1.1). Press Enter. Step 2 Type the username and password in the login page, the default username and password both are admin, click OK to log into the device.
How do I reset my booster?
Factory reset your Boost Wi-Fi To restore to factory settings, press and hold the reset button for 5 seconds using a pin or a paperclip.
How do I test my TP-Link Router?
What is the username and password for TP-Link Router?
After the hard reset, the IP address of the device should be change to the default 192.168. 1.1, and the default login username and password are both admin (all lower case).
Why is my booster red?
Your Wi-Fi Boost is not connected to the network. – If the red light persists, try re-syncing your Wi-Fi Boost with the Boost connected to the modem. … Do not turn off your Wi-Fi booster during this time.
Do WiFi extenders work with any router?
Here are some things to consider when choosing a Wi-Fi extender: Compatibility: A Wi-Fi extender will be no use if it is not compatible with your router, so always make sure to check this before buying. Most modern devices are N-category routers, although the newest and most advanced devices are AC-category routers.
What is the username of TP-Link Router?
admin
What is the IP address of TP-Link Router?
192.168.1.1
How do I log into my TP router?
Step 1 Open the web browser and type the IP address of the device in the address bar (default is 192.168. 1.1). Press Enter. Step 2 Type the username and password in the login page, the default username and password both are admin, click OK to log into the device.
What is the default password for TP-link Wifi?
admin
What is the IP address of TP Link extender?
Open the web browser and type the IP address http://192.168.0.254 or http://tplinklogin.net into the address bar and then Press Enter. Type the username and password into the boxes of the login page, the default username and password both are admin, then press Enter.
Découvrez plus d’articles dans nos rubriques Apprendre et Ordinateur et Internet. N’oubliez pas de partager l’article avec vos amis !